To your disappointment, your computer's newly installed hard disk is not there. Don't worry; all you have to do is Additional Sata Drives Not Showing Up.
Troubleshooting SATA drive detection
After purchasing a large hard drive during a sale, you opened your computer casing and connected the drive to the motherboard and power supply using the proper connectors (no? Before you continue reading, you should confirm that. Upon restarting your computer, the new hard disk was not present. Read the secondary drive not showing up in disk management.
Or perhaps, after following our external hard drive lesson, you're still baffled as to why, despite hearing the disk churning in the enclosure, you can't see it in Windows. What's troubleshooting sata drive detection?
It's not always the case that extra hard drives you buy are formatted and ready to use, unlike the hard disk that comes with an external drive or off-the-shelf computer. There is no advantage to preformatting or otherwise altering the drive at the manufacturer; instead, they are completely blank. This is because the concept is that the end user will do anything they want with the drive.
Read Also: How To Unlink My Pearl Abyss Account From Steam?
Methods for Getting Your Lost Drive Online
Bring the hard drive online is a relatively easy operation, if it is installed correctly and isn't (by some terrible stupid luck) faulty from the start. You must launch the Windows Disk Management program before you can accomplish this.
The Run dialog box may be opened by pressing Windows+R on your keyboard. In the box, type diskmgmt.msc, then hit Enter.
How to Quickly Fix Windows 10's Inability to Detect a Second Hard Drive:
1. Press Enter after typing device manager into Search.
2. To update the driver software, expand the disk drives, locate the second disk drive, and then right-click on it.
3. Your hard drive will be upgraded if you adhere to the further update initializing a new sata drive.
4. You may also check whether general updates include anything for your hard drive by going to Settings > Update.
5. Click the four quick shortcuts below to begin fixing the Windows 10 issue where the second hard drive is not recognized or additional hard drives missing in windows.
| Workable Solutions | Step-by-step Troubleshooting |
|---|---|
| Phrase 1. Check the hard drive in BIOS | Restart PC and press F2 to enter BIOS. Enter Boot Menu to check if the second hard drive is detected. |
| Phrase 2. Check the hard drive's state | To scan your drivers, click the blue button after opening EaseUS DriverHandy. |
| Phrase 3. Scan and restore saved data | You must first retrieve any crucial data that you may have stored on the second hard disk. |
| Phrase 4. Check the hard drive in DM | Verify your computer's second hard disk in Disk Management and additional sata drives not showing up. |
In Windows 10, my second hard drive is not visible.
"Hey everyone, does anybody know how to get Windows to recognize the second hard drive? About a month ago, I upgraded my computer by adding a second hard drive, which significantly increased its speed. Up until this morning, everything was going so smoothly.
When I turned on my PC, File Explorer did not display the second hard disk. After that, I looked at the Disk Management. Nothing was there, however. On the second hard drive, I stored a lot of crucial information. How do I get it to appear? If you have a solution, please share it with me.
You May Also Like: Can I Run The Sata Drive Thru The Sas Controller
Diagnose and Repair Windows 10's Unrecognized Second Hard Drive
- This section aims to assist you in identifying the reasons behind an invisible second hard drive and provide you with options to restore its visibility.
- Reinstalling the second hard drive and reconnecting it is a quick fix.
- Check the SATA and hard drive power cables first if your hard disk isn't showing up in File Explorer or Disk Management.
Step 1: Use a screwdriver to remove your computer's hard disk.
Step 2: Verify that there is no loose hard drive connection.
If so, take the hard drive out of the computer casing and put it back in. Replace the power wire and SATA/ATA cable, then reattach the drive to the computer if any of the cables are broken.
Step 3: Replace the computer casing, restart the computer, and see if your hard disk is visible.
You can end here if Windows recognizes the second drive. How to Partition a Hard Drive could also be of interest to you.
Continue using the following terms, however, if the disk is still not visible in Windows File Explorer or Disk Management.
Phase 1: Verify and enable the BIOS to detect the second hard drive.
relates to: Resolve the BIOS fault when Windows fails to recognize the hard disk.
Step 1: Press F2 to access the BIOS after restarting the computer.
Step 2: To see if the second hard drive is identified, enter the missing sata drive in file explorer.
Step 3: If the second hard disk is not visible, try the following advice to additional sata drives not showing up:
Read Also: GeForce Rewards: Pc Game Pass Geforce Reward.
Final Notes
We outlined the whole procedure for examining and resolving a Windows 10 hard disk that is not detecting on this page. These techniques can be used to resolve Windows' inability to identify or recognize a hard disk or second hard drive on any Windows operating system.
Additional Sata Drives Not Showing Up, if your hard drive is not identified, it is most likely due to a driver problem, a connection problem, or a malfunctioning BIOS setting. A malfunctioning USB port or an old cable may be the cause of connection problems. Additionally, if the BIOS settings are wrong, the new hard drive is deactivated.
FAQs: Resolving Sata Drive Configuration Errors
Why is my SATA SSD no longer showing up?
If the data cable is broken or the connection is not right, the BIOS will not recognize an SSD. Particularly with serial ATA connections, the connection may occasionally come loose. Verify that your SATA cables are securely fastened to the SATA port.
Why is my second hard drive not showing up?
You cannot view an uninitialized hard disk on this computer since it would be identified as unallocated space. Thus, initialize the HDD or SSD if the second hard disk is a fresh one. Get EaseUS Partition Master, a free third-party partition manager. It can assign a drive letter to troubleshoot the issue fast.
Why is my additional hard disk not detected?
To rule out a bad connection, try a new cable and another USB port if your computer isn't detecting the disk. A light on your external drive can also serve as a fast indicator of whether power is being delivered and the connection is functioning.
Why is my new SATA drive not showing up?
If the data cable is broken or the connection is not proper, the BIOS will not recognize a hard drive. Particularly with serial ATA connections, the connection may occasionally come loose. Verify that your SATA cables are securely fastened to the SATA port.